Oriwen Fluidics Technology (Shanghai) Co., Ltd.
Oriwen Fluidics Technology (Shanghai) Co., Ltd.

Products >> Electric Rotary Valves >> 

  • New Series 16 Ports Electric Rotary Dispensing Valves
New Series 16 Ports Electric Rotary Dispensing Valves

New Series 16 Ports Electric Rotary Dispensing Valves


New Series 16 Ports Electric Rotary Dispensing Valves


Our Z20 series of electric rotary valves (multi-port dispensing valves) use encoders to collect signals and rely on stepping motors for control. They are widely used in automatic parts for sample collection, liquid injection or flow conversion.


Features

1. PTFE valve core: corrosion-resistant, self-lubricating, and suitable for a variety of special media;

2. Drive integration: The valve body motor control circuit is integrated inside, and the host can communicate with the controller through the RS232/RS485 protocol;

3. Resistance to strong chemical corrosion: Only the valve body and valve core are in contact with the medium, and the valve body is made of special fluoroplastics, which can be applied to various corrosive liquids;

4. Wide selection: various switching valves from 6 to 16 ports are available;

5. Sealing method: the stator and the rotor are closely attached to achieve the highest service life and excellent sealing;

6. Drive mode: direct motor drive, more accurate positioning and higher precision;

7. Fully closed-loop control is adopted to ensure the accuracy of the reversing and positioning of the liquid path;

8. Precise position feedback, feedback position information through encoder calculation;

9. Block-turn information feedback;

10. Convenient configuration software tools, convenient parameter configuration and debugging.



Specifications

Stator Form

Inclined

Wetted Material

Stator: PTFE(Customizable)

Rotor: PCTFE

Flow Path Structure

6, 8, 10way; 12,16 way

Flow Path Orifice Size

1.50 mm; 1.0mm

Thread Connector

1/4’’-28UNF

Dead volume

(port to port volume)

4.5ul

Work Pressure

Air pressure 0.8Mpa

Water pressure 1.6Mpa

Initial Position Detection

Automatically reset to the initial position after power on

Applicable Medium

Various highly corrosive chemical media

Ambient temperature

Max 60

Medium temperature

Max 100

Relative humidity of environment

80%

Voltage

24 VDC

Current

2 A

Power

48W

Port-to-Port Move Time

80~100 ms

Communication Protocol

RS-485

Communication Rate

9600bps (default, modifiable)

Dimensions

57x57x150mm

Weight

1300g; 1400g



Port Selection Mode
(structure sketch: Switching or Selection)



Flow path selection and mixing

This selection/mixing injection valve can be used for precisely repeated bi-directional flow paths. For example, the common port in the middle of a 10-port injection valve can be connected to any other 10 outlets, or 10 separate inlets can be connected to a common outlet (Similarly for 6-port, 8-port, 12-port and 16-port valves).

*The COM terminal is a public channel, which can be selectively connected to ports 1~16.

Liquid path selection and mixing, for example, the same liquid flows to different ports to achieve the distribution effect, or multiple liquids flow to the outlet together to achieve the mixing effect.


Feel free to contact us for quotation of new series Electric Rotary Valve.

 


WechatClose
Wechat