Products >> Micro Pump >> Micro Gear Pump

ORIWEN Inkjet Pump Precision Filling Machine Gear Pump

ORIWEN Inkjet Pump Precision Filling Machine Gear Pump

Product No.：2023118171120
Online Inquiry

ORIWEN Inkjet Pump Precision Filling Machine Gear Pump

This product uses a brushless DC motor to power the gear pump. It is equipped with a brushless motor driver to realize motor function control, with speed measurement, adjustable rotation speed and forward and reverse functions. It can be connected with the host computer to realize intelligent control, which is especially suitable for workplaces with frequent starts and stops, such as precise liquid canning.

Features

. Pulsation-free high precision

. PEEK gears and bushings are resistant to organic solvents, corrosion, and high strength and friction resistance.

. Static sealing, truly zero leakage

. External motor drive, low installation cost and long service life

. Smooth gear transmission

. The brushless motor can work continuously for about 20,000 hours, and the normal service life is 7-10 years.

. Safety and environmental protection levels can meet international standards (CCC, ROSH, CE)

Technical Parameters

	Description
Motor	Brushless DC motor
Speed	500-4500rpm
Voltage	24V
Current	6A
In and out direction	Both sides of the pump body
In and out thread	G1/4 G1/8
Temperature resistance range	-40-110℃
Noise	60dB
Material	Pump body 316L, alloy, sealing ring PTFE, gear PEEK
Insulation level	H
Drive mode	External driver
Way of working	Continuous or intermittent work
Inlet filter	Recommended 400 mesh
Motor wiring instructions	Red: +24V Black: 0 Yellow (thin): HALL A(U) Green (thin): HALL B(V) Blue (thin): HALL C(W) Yellow (thick): R(U) phase Green (thick): S(V) phase Blue (thick): T(W) phase

Flow Curve

Application

Food and beverage, cosmetics, mechanical inkjet coding, life sciences, chemical measurement, etc.

Production Selection

Model	Flow (L/min)	Displacement (mL/rev)	Pressure (bar)	Height (mm)	Width (mm)	Weight (kg)	Rated Current (A)	Viscosity range (cps)
ORISGE0.3DCM57-24-80W	1.2	0.3	5	178	60	80	3.5-8	0.2-1500
ORISGE0.9DCM57-24-120W	3.6	0.9	10	184.5	60	120	6
ORISGE0.9DCM57-24-150W	3.6	0.9	15	176	60	150	15
ORISGE1.2DCM57-24-120W	6	1.2	10	184.5	60	120	6
ORISGE1.5DCM57-24-150W	6	1.5	15	176	60	150	15

Precautions

1. It is strictly prohibited to transport or clean solvents and materials containing dichloromethane, tetrahydrofuran, butyllithium, and dimethylacetamide.

2. Before disassembling the pump, please cut off the power supply to the motor and completely release the pressure in the pump.

3. Do not change the components of the pump and motor. Any changes may reduce the pressure rating of the pump and cause harm to people.

4. A sealing ring or sealant or raw material tape must be placed on the inlet and outlet joints of the pump, especially at the inlet. If there is air leakage, the liquid will not be sucked, and the noise will even increase.

5. It is prohibited to transport media containing particles, and it is prohibited to run idling/dry.

OEM service is available upon your request.

Model Identification

ORI S GE 0.18 DCB66 -24 -40W

① ② ③ ④ ⑤ ⑥ ⑦

① ORIWEN brand code: ORI

② Pump body material:

S: SUS316L; S1: SUS304; H: Hastelloy alloy

③ Pump shaft seal

GE: Magnetic Drive; PK: Packing seal; PF: Packing seal (water injection type)

MS: Mechanical Seal (Carbon / A12O3); MC: Mechanical seal (SiC)

④ Displacement

0.18: 0.18mL/rev; 0.3: 0.3mL/rev